Fruits&Vegetables pesticide degradation machine Q & A
1.Q：After processing, can fruits and vegetables directly be eaten immediately?
A：Yes, after cleaning, fruits & vegetables they can be at ease to eat.
2.Q：How long is suitable for the washing period?
A： It is more difficult to clean the leaf vegetables, which takes ten minutes, while melon rootstock class can be less than ten minutes accounting for the amount of quantity.
3.Q： How often does water need to be changed?
A：Due to the device using the recycling water. At the same time, water will pollute with a lot of impurities, so basically water should be changed according to the cleanliness of water.
4.Q：Would it influence the second wash when the pesticide left in the first wash water?
A：FUSHUI’s most important effect is response to water . Physical test data shows that within the certain time limit, set of water-soluble and fat-soluble pesticide will be degraded by more than 90%. Therefore, there is no secondary pollution.
5.Q:Why FUSHUI processors can get rid of pesticides?
A：FUSHUI’s basic principle is by the high dissolving power of water and gas together, increase the "right amount" of dissolved oxygen. At the same time, to produce a large amount of micro bubbles, which also can make the leaf vegetables’dirt and insect be rinsed out making it sink or float in water. And pesticide degradation principle is treated in accordance with the water molecules dissolved oxygen and high energy field, the pesticide chemical molecular bond to be broken, formation of another kind of nontoxic compounds such as carbon dioxide and water, etc.
6.Q: How to operate the fruit and vegetable pesticide degradation machine? Is it easy to operate? Can workers easy to learn how to use it?
A: It is installed at the bottom of the washing tank, so as long as the tube filled with water, what you need to do is to turn on power switch. When the outlet ejects air bubbles ,it can gradually achieve the degradation conditions.
7.Q：How much fruits and vegetables can it wash at the same time?
A：This equipment has the commercial, industrial, and the future development for household type. The commercial type have two, S and M. Type S is suitable for a tank less than 160 liters in volume. And type M is between 160 liter to 300 liters.
8.Q：The degradation of pesticides usually adapts the technology of ozone O3, high antioxidant to break down, oxidation of pesticides. Why FUSHUI can oxide pesticide?
A: Now on the market 90% of equipment for pesticide degrader are ozone O3. FUSHUI use physical reaction to handle pesticides by water characteristic and kinetic energy of chemical bonds and break them into another kind of nontoxic compounds such as H2O and CO2, etc. At the same time because of the high pressure to produce a large number of bubbles in the fruits and vegetables will be hidden bugs and dirt cleared out.
9.Q：O3 have sterilization, cleaning, preservation, and other functions. What’s the advantage of FUSHUI?
A: Sterilization and cleaning are different concepts. Clean means to get rid of the bacteria and sterilization is to destroy it through chemical reaction , which canot be seen through the naked eye . Ozone can only play the sterilization conditions , which can't remove dirt. Preservation optimum condition lies in the temperature control of water temperature and environment not by ozone. FUSHUI according to things above can have at the same time clean and depredate pesticides two big advantages.
10.Q： O3 commercial dish washing machine’s price is much lower than the FUSHUI fruits and vegetables pesticide degradation machine. What is the advantage of FUSHUI water processor?
A: In order to achieve specific data to remove pesticide residues, but not use in the ambiguous market terms "should be". FUSHUI fruits and vegetables pesticide degradation machine will stand in a professional and responsible attitude to test 200 species of large amounts of pesticide , making experiment destructive testing within a long time. It is very hard to do immediately degradation of pesticides. And we don’t have such a perfect equipment until now.
11.Q： Should the power supply be arranged ahead of time?
A: Yes. To ensure the voltage requirement is met (220V or 380V), the location of power outlet is installed according to safety requirements, the length of power line is sufficient.
12.Q: How to determine the best location of inlet and outlet on water sink?
A: It should consider the water convection, and close to the bottom of the sink as possible. Detail see installation instruction.
13.Q: What we should do If electrical plugs get wet during the operation?
A: Dry it completely before reuse.
14.Q: What we should If motor did not respond?
A: Check the main panel to see if air-switch come off, Check all connecting points. If there is burning smell in the air, then the motor is burned.
15.Q: What we should do if there is no white bubbles?
A: 1. Clean filter screens, 2. Check the pressure reading, if the pressure is less than 4 kg/m3, there should be a leakage in the system. (Note: if the leakage occurs in sucking section in the recycle system, there will be no water leakage.)
16.Q: After the installation, the motor is on but there is no water coming out? (380V)
A: Check the motor wiring, might require to switch the hot wire and null wire.
17.Q: Does water level has to surpass the water sucking inlet?
A: Yes, otherwise air will be sucked into the system.
18.Q: What should we do if white bubbles get thinner, and the pressure is over 6kg/M3？
A: Clean the water eject nozzle.
